Fiber Connector Types
Common fiber optic connectors and their characteristics.
Fiber optic connections come in several connector types, each designed for a different density, environment, or performance requirement. LC is the modern default for SFP and SFP+ transceivers, SC dominates in OSP and patch panels, MPO/MTP is used for 40G and 100G parallel optics, and ST and FC persist in legacy and industrial installations.
The polish matters as much as the connector: UPC and APC terminations are not interchangeable, and mixing them across a link damages the end faces. When documenting your cable plant, record both the connector and the polish - the Fiber Patch Panel Inventory template is built for exactly this.
| Connector | Type | Polish | Return Loss | Typical Use |
|---|---|---|---|---|
| LC | Duplex | UPC / APC | >50 dB (APC) | SFP/SFP+ transceivers, high density |
| SC | Duplex | UPC / APC | >50 dB (APC) | OSP, patch panels, older equipment |
| ST | Simplex | UPC | >30 dB | Legacy multimode, industrial |
| FC | Simplex | UPC / APC | >60 dB (APC) | High-power, test equipment, telco |
| MPO/MTP | Multi-fiber | UPC / APC | >20 dB | 40G/100G parallel optics, trunk cables |
| E2000 | Duplex | UPC / APC | >50 dB (APC) | European telco, spring-loaded shutter |
More Reference
Explore the other reference in the toolkit.
RFC 1918 Private IP Ranges
RFC 1918 defines the private IPv4 ranges 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16. See each range, host count, and common use.
Common TCP & UDP Ports
Reference list of common TCP and UDP ports: SSH, DNS, HTTP, HTTPS, SMTP, NTP, DHCP, SNMP, RDP, and more, with protocols and descriptions.
Ethernet Standards (IEEE 802.3)
Reference table of IEEE 802.3 Ethernet standards: 1000BASE-T, 10GBASE-T, 10GBASE-SR/LR, 25G, 40G, 100G, and 400G with media and distances.
RFC References for Network Engineers
Quick reference list of the essential networking RFCs every infrastructure engineer should know, from RFC 1918 to BGP, DHCP, DNS, and NTP.
Reserved & Special-Use IP Addresses
Reference table of special-use IPv4 ranges: loopback, link-local (APIPA), CGNAT, TEST-NET documentation ranges, multicast, and broadcast.
Cable Color Codes (TIA-606)
TIA-606 cable color codes for structured cabling: blue for horizontal cabling, orange for demarcation, purple for common equipment, and more.
Transceiver Form Factors
Reference table of optical transceiver form factors: SFP, SFP+, SFP28, QSFP+, QSFP28, QSFP-DD, CFP2, XFP, and CXP with speeds and distances.
WiFi Standards (IEEE 802.11)
Reference table of WiFi standards: 802.11b through 802.11be (Wi-Fi 1 to Wi-Fi 7) with maximum speeds, frequencies, and release years.
Power Connectors & Receptacles
Reference table of data center power connectors: NEMA 5-15P, L6-30P, IEC C13/C14, C19/C20, IEC 60309, Schuko, and BS 1363 with amp and voltage ratings.
Device Naming Conventions
Standard network device naming convention: use a <site>-<role>-<number> pattern. See examples for switches, firewalls, servers, and stack members.
Interface & Port Naming
How to standardize network interface names across vendors: Cisco IOS, Juniper Junos, and NX-OS/AOS-CX conventions with examples.
VLAN & Subnet Naming
Best practices for VLAN naming: descriptive names like SRV-PROD and GUEST-WIFI paired with documented VLAN IDs and subnets.